The Solartron Mobey safety switch is designed primarily for fitting to safety guards or access doors of electrically driven machines, wired in series with the stop/start button circuit it will prevent the machinery being started unless the safety guard is in position, and it will break the circuit if the guard is inadvertently opened while the machine is running. It is an interlock switch recommended for use where a sealed switch is required

The safety switch may also be wired to an audible or visual alarm to indicate that a safety guard or access door is open

The Mobrey Magnetic Safety Switch is an interlock switch recommeded for use where a sealed switch is required. It is the responsibility of the user to carry out a suitable risk assessment exercise of the total safety system in accordance with BSEN954-1. Complies with the requirements of the applicable European directives and regulations for a safety component

When the guard is in position the actuating magnet must be located in the 'T' shaped recess of the fixed assembly. The two 'T' shaped magnets will repel each other through the wall of the fixed assembly to activate the SPDT changeover switch with a snap action

The retaining magnet in the switch body provides a return force to reverse the changeover switch when the actuating magnet is withdrawn. The Magnetic Safety Switch is an interlock switch recommeded for use where a sealed switch is required. It is the responsibility of the user to carry out a suitable risk assessment exercise of the total safety system in accordance with BSEN954-1. Complies with the requirements of the applicable European directives and regulations for a safety component

The Solartron Mobrey safety switch is operated by a special 'T' shaped magnet designed to deter deliberate interference. The magnetic transmission system eliminates the necessity for mechanical linkage between the safety guard and the switch. This feature is particularly advantageous where, for operating reasons, the guard has to be completely removed. The switch contacts (SPDT changeover) are moved in both directions entirely by magnetic forces and are not dependent upon springs or toggle arrangements

The switch cover is secured by special lockshield screws to make it tamper resistant. A special key provided with each switch permits access for installation and maintenance. The switch housing is proofed to allow hosing with hot water as required by food processing and other allied industries

Features
- Deters deliberate interference
- No springs or mechanical links
- Magnetic transmission
- Dustproof and rugged
- Hoseproof IP66
- Works in any position

Spares kit SK48
Each kit consists of 2 magnets

Unfortunately the 30800 safety switch and spares kit SK48 have been discontinued