MAXVU Rail Limit Controller
|© Ward Industries Limited 2017. All rights reserved. Site design: A.D. Cherrington
Ward Industries Ltd., a company registered in England & Wales.
|Company # 2254944
VAT # GB 486372021
MAXVU Rail temperature and process limit controller is easy to install and fast to set up with an easy-to-read OLED display.
MAXVU Rail provides an affordable solution where secondary temperature limit protection is required. It offers a universal input and up to 3 outputs.
- DIN rail mounted
- Universal input
- Up to 3 outputs
- Digital input
- RS485 communications option
- Fast configuration
- Clear OLED display
- 22.5mm module width
Thermocouple: J, K, C, R, S, T, B, L, N
RTD: 3 Wire PT100
DC Linear: 0-20mA, 4-20mA, 0-50mV, 10-50mV, 0-5V, 1-5V, 0-10V, 2-10V. Scalable -1999-9999, with adjustable decimal point.
Accuracy: Thermocouple +0.25% of full range + LSD (+1degC for thermocouple CJC). PT100 +0.25% of full range, +1LSD, Linear +0.25% of full range, +1LSD.
Sampling: 4 per second
Impedance: >10MOhms resistive, except DC mA (5Ohms) and V (47KOhms)
Sensor Break Detection: <2 seconds (except zero based DC ranges), high alarms activate for T/C, RTD and mV ranges, low alarms activate for mA or V ranges
Digital Input: Reset Alarm. Volt Free or TTL compatible, 24VDC
Relay: LIMIT SPDT Form C, AL1 / 2 SPST Form A relay; current capacity 2A at 250V. >150,000 operations at rated voltage/current, resistive load
SSR: Drive capability >10V DC @ 20mA
Linear DC: 0-20mA, 4-20mA, 0-5V, 0-10V or 2-10V, Current Output 500Ohms max, Voltage Output 500Ohms min
Serial Communications: 2 Wire RS485, 1,200-38,400 baud, Modbus RTU
A concise product manual is supplied with each product.
All prices are ex-works. VAT, if applicable, charged extra at the ruling rate at checkout.
Packing and postage charged extra at checkout.